Home   Version Francaise   Products    Seminars   Techniques   Catalogue   Corporate Profile   Contact Us

MSDS    Technique    

Material Safety Data Sheet TITAN Section 1. Identification of Substance/Preparation and Company/Undertaking Product Name: TITAN Manufacturer: Apex Dental Materials, Incorporated 875 Piper Way Sandwich, IL 60548 Emergency Telephone Number: 1-877-273-9123 Telephone Number for Information: 1-877-273-9123 Date Prepared: October 2, 2006 Section 2. Composition/Information on Ingredients Ingredient CAS No. OSHA PEL ACGIH TLV Other 2-Methyl-2-Propenoic Acid (1 Methylethylidene) Bis (4,1-Phenyleneoxy (2-Hydroxy-3, 1-propanediyl)) Ester 1565-94-2 N/A N/A N/A Triethylene Glycol Dimethacrylate 109-16-0 N/A N/A N/A Barium Oxide filler 1304-28-5 15 10 N/A Amorphous silica 112945-52-5 20 10 N/A Section 3. Hazards Identification Eye irritant Possible skin irritant Section 4. First-aid Measures Inhalation: Provide fresh air and rest Skin Contact: Flush with copious amounts of water Eye Contact: Flush with running water for a minimum of 15 minutes. Seek medical attention Ingestion: Drink 2 or more glasses of water or milk, seek medical attention. Do not induce vomiting Section 5. Fire-fighting Measures Fire Fighting Media: Dry chemical powder, foam or carbon dioxide Fire and Explosion Risks: Upon combustion, irritating gases may form Section 6. Accidental Release Measures Precautions: Prevent skin/eye contact Method for Clean-up: Wipe with damp cloth, discard appropriately Section 7. Handling and Storage Use according to directions for use. Store at room temperature in the original container provided by the manufacturer. Avoid unnecessary exposure to the product. Section 8. Exposure Controls/Personal Protection Eye Protection: Wear protective eyewear Hand Protection: Wear protective gloves Respiratory Protection: Avoid prolonged breathing of vapors Skin Protection: Avoid contact, if contact does occur rinse with copious amounts of water Section 9. Physical/Chemical Properties Appearance and Odor: Tooth colored thin paste material Boiling Point: > 100º Celsius Vapor Pressure (mm Hg) N/A Vapor Density (Air = 1) N/A Specific Gravity (Water = 1) 1 Melting Point < 0º Celsius Evaporation Rate N/A Solubility in Water Not water soluable Section 10. Stability and Reactivity Stable. Avoid high temperatures Section 11. Toxicological Information Eye Contact: Irritates the eyes Skin Contact: May irritate the skin Sensitization: May cause allergic reaction upon contact with the skin Other: N/A Section 12. Ecological Information Use as directed. Follow local law governing disposal of chemicals. Section 13. Disposal Considerations Follow local law and regulations for disposal of this material. If none exist follow state or regional laws and regulations Section 14. Transport Information Follow local law and regulations for disposal of this material. If none exist follow state or regional laws and regulations Section 15. Regulatory Information Classification: R36 Irritating to eyes., R38 Irritating to skin., R43 May cause sensitization by skin contact., Xi; Irritant, Safety: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S45 In the event of an accident call immediately a physician. If possible show him/her this document. Section 16. Other Information Revision Date: 10/2/06 Revision Number: 1 NOTE: This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability or their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein.