| Sure / Dental Innovations |
|
| PORCELAIN BONDING |  |
Porcelain Veneers
When first introduced Porcelain Bonded Restorations were thought of
as a temporary restoration lasting 3-7 years. Today with advancements
in Adhesive Dentistry Bonding is considered permanent in nature.
|
AUXILLARY
|
DOCTOR
|
HOT TIP
|
| (Armamentarium) Glass Slab, Medium Sized Spatula, Dappen Dish filled with Alcohol, Silane Coupling Agent, Dentin Adhesive System, (Bonding Agent) Veneer Luting Composite, Tint & Opaquer Kit. Thin unwaxed Floss, Pik & Stik or Veneer Butler) | Try Veneers on Model (Observe fit and Translucency) | |
|
Speed Bonding Technique
.
|
Pumice Teeth with unflavoured pumice. Try Veneers on teeth with water. Surface tension will aid in veneers adhering to teeth. Patient can stand or sit up in chair and veneers should stay on teeth. If shade is off...determine cause. Wrong shade of porcelain or in the case of discoloured teeth "showtrhough" If shade of porcelain is off modify cement with appropriate tints, which will achieve the desired shade. If there is a problem with show through modify the cement with an opaquer, or paint opaquer on stained area of teeth, air thin and spot cure 5 seconds. |
|
|
After Try In rinse Veneers in alcohol & dry with air syringe. Apply Silane Coupling Agent & Lightly Dry with Air Syringe. Do not accept veneers from the lab pre silanated. Apply unfilled resin (Bonding Agent) to veneers and thin with Air Syringe (Do not Light Cure) Shelter Veneers from ambient light (Dixie Cup - Mixing Bowl) |
Etch Teeth to be veneered 30 - 40 % phosphoric acid. Apply Dentin Adhesive to teeth covering any exposed Dentin. If there is no exposed dentin skip this step and use unfilled resin (Bonding Agent)
|
|
|
Fill veneers with desired shade of composite Pass veneers to Doctor using if necessary Pik & Stik or Veneer Butler. |
|
HOT
TIP USE VENEER BUTLER OR PIK & STIK FOR PASSING AND PLACING VENEERS
|
|
Place Veneers on teeth (working from centrals back, place 2 veneers at a time & tack in place approx. 5 second light cure) Once Veneers are in place run mylar strips interproximally remove excess with a brush. Remove all remaining flash. Fully cure veneers approx. 100 sec. per tooth. Bond remaining Veneers in a similar fashion. |
HOT TIP USE PRIMIER |
Disclaimer: Techniques, Tips
and MSDS are presented as a service by Sure / Dental Innovations
and are presented as suggestions only. In all cases offices are asked to consult
manufacturers current Instruction Sheets
and MSDS.
Sure / Dental Innovations is not liable for information presented at this site.
