Home   Version Francaise   Products    Seminars   Techniques   Catalogue   Corporate Profile   Contact Us

MSDS    Technique

Star Fill 2B TM

MATERIAL SAFETY DATA SHEET

SECTION I - PRODUCT IDENTIFICATION
Company: Danville Materials
2021 Omega Road
San Ramon, CA 94583
Phone: (800) 822-9294
Fax: (510) 838-0944
Prepared: January 16, 1998

SECTION II - HAZARDOUS INGREDIENTS OF MIXTURES
Material % WGT OSHA PEL ACGIH TLV
Barium Glasss 45-65% 15 10
BIS GMA 15-45 N/L N/L

SECTION III - PHYSICAL DATA
Vapor Pressure mm HG: ND
Evaporation Rate (Ether = 1): NA
Solubility in Water: Insoluble
Appearance: Tooth-shaded Resin Paste
Odor: Slight


SECTION IV - FIRE AND EXPLOSION
Flash Point: >+104OC
Extinguishing Media: Carbon Dioxide, Foam, Dry Chemical
Special Fire Fighting Procedures: None
Flammable Limits: ND
Unusual Fire and Explosion Hazards: None

SECTION V - REACTIVITY DATA
Stability: Stable
Conditions to Avoid: Prolonged extreme heat beyond 40OC and intense light.
Incompatibility: ND
Hazardous Decomposition Products: None known.
Hazardous Polymerization: None

SECTION VI - HEALTH HAZARDS
OSHA Permissible Exposure Limits: None
Other Exposure Limit Used: None
ACGIH Threshold Exposure Limit: None
Chronic, Other: None
Acute Overexposure: Irritation to eyes and skin may occur with uncured resins. May cause skin sensitivity in select individuals.
Medical Conditions Generally Aggravated by Exposure: None Known
Hygienic Practices: None
Primary Route(s) of Exposure: Skin - Yes. Inhalation and Ingestion - No.

SECTION VII - EMERGENCY AND FIRST AID PROCEDURES
Signs of Exposure: Severe skin or eye irritation, redness or burning sensation.
Skin: Wash off affected area with soap and water.
Ingestion: Seek immediate medical advice, carry container with label.
Eyes: Rinse immediately with plenty of water and seek medical advice.

SECTION VIII - SAFE HANDLING AND USE PRECAUTIONS
Spill Management: Use absorbent to collect the material. Wash contaminated surfaces with soap and water.
Waste Disposal Methods: This material contains hazardous constituents. Dispose of safely in accordance with local, state and federal regulations. Avoid temperatures in excess of 40OC.

SECTION IX - PROTECTION INFORMATION/CONTROL MEASURES
Respiratory: None Eye Protection: Safety goggles
Glove: Surgical rubber/PVC gloves Other Clothing & Equipment: Face mask
Ventilation: None required, local exhaust
recommended.

1Bertolotti R.L. PP&A Aesthetic Chronicle 1991; 3, 53-58.
2Ferrari M. PP&A Aesthetic Chronicle 1993; 5, 29-36.
3Garberoglio R. et al. Am J Dent 1995; 8, 303-307.

To Order Please Call 1-888-277-2335