|
Seamfree Directions for Use (*) Seamfree Instructions SYRINGE: Install applicator tip on the Seamfree syringe. Dispense a small amount onto patient napkin to be sure material is flowing freely from the syringe. Apply Seamfree to the desired surfaces to be lubricated or “de-tackified”. The surface may be an instrument or uncured composite material. Continue with the placement of the composite materials. Activate all composite materials according to manufacturer’s instructions. Seamfree will co-cure with the composite material being used so separate activation of Seamfree is not required. BOTTLE: Dispense one drop of Seamfree into a well. Apply Seamfree to the desired surfaces to be lubricated or “de-tackified”. An instrument may be dipped into the Seamfree or the Seamfree may be applied to an instrument or uncured composite material. Continue with the placement of the composite materials. Activate all composite materials according to manufacturer’s instructions. Seamfree will co-cure with the composite material being used so separate activation of Seamfree is not required. NOTE: Only a thin layer of Seamfree is necessary. Avoid excess build up to ensure acceptable results. STORAGE Protect from sunlight and excessive temperatures (30°C/85°F). Store at room temperature (22°C/72°F). Refrigerate materials that are not to be used for more than 7 days. See individual component labels for specific expiration dates. CAUTIONS Avoid contact with eyes. If the material comes into contact with the eyes, flush with copious amounts of water and seek medical attention. Un-polymerized resins may cause skin sensitization in susceptible persons, in case of contact with the skin, wash thoroughly with soap and water. WARRANTY Apex Dental Materials, Inc. recognizes its responsibility to replace products if proven to be defective. Apex Dental Materials, Inc. does not accept liability for any damage or loss, either direct or consequential, stemming from the use of or inability to use the products described. Before using, it is the responsibility of the user to determine the suitability of the product for its intended use. The user assumes all risk and liability in connection therewith.
|
